Artikelnummer: DY13C034

AIS100 Receiver

De voordeligste AIS Receiver. Betrouwbaar en robuust. O.a. veelvuldig gebruikt met de Volvo Ocean Race.

De nieuwste versie ! Uitermate licht en betrouwbaar. Eenvoudige installatie en werkt met alle bekende navigatiesoftware. Uiterst laag stroomverbruik en geen separate voeding meer nodig. De AIS100 receiver betrekt de stroom via de USB poort.

Antenne aansluiten en de USB verbinding maken met de laptop of PC. Geen gecompliceerde verbindingen die gesoldeerd of via ingewikkelde stekkers/adapters dienen te worden aangesloten. Vaart u vaker op andere schepen? Dan is de nieuwste AIS100 voor u dè oplossing! Zeer geschikt voor mobiel gebruik samen met een mobiele antenne.

Wij leveren verschillende antennes: van marifoon- en sprietantenne tot lichte gemakkelijk te verplaatse VHF antennes. Vraag nadere informatie: info@b-bit.nl

Connects to any NMEA AIS compatible chart plotter and adds an AIS overlay. Simple to install, highly sensitive dual channel design that’s easy to install with Garmin, Raymarine, Standard, Lowrance, Simrad, Furuno etc plotters”

This value priced, entry level AIS receiver is Digital Yacht’s most cost effective solution for adding AIS to your boat. Featuring the same dual channel receiver as the AIS100Pro, but without the USB interface and multiplexer, there is no compromise on performance and the AIS100 will out-perform all other, inferior, single channel receivers.

For use with existing AIS compatible chart plotters, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Typical AIS reception range is 20 nM for a mast top antenna.

FEATURES 
·     Low cost entry level AIS receiver 
·     High performance dual-channel AIS receiver for use with existing plotter and radar systems 
·     High speed NMEA output (38,400 baud) 
·     Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter 
·     Easy to install IP54 black box solution 
·     BNC antenna connector

De fabrikant schrijft verder nog het volgende:

"Great entry-level AIS receiver for use with PC navigation software and chart plotters, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Connected to an existing VHF antenna (via a splitter) or dedicated AIS antenna, you can receive all AIS targets within range – typically up to 30nm. Simple plug and play USB connection to a PC. Comeswith drivers for Windows XP/Vista/7/8 and is automatically mapped to an available "virtual" com port, which your PC software can read. Also compatible with Mac OS X and all LINUX Kernels since V2.4.20. 

The AIS100 Pro has a dual NMEA0183 and USB output capability, allowing you to supply AIS data to a PC (via USB) and a dedicated plotter (via NMEA) for larger installations.

Connect the NMEA (4800 baud) output of your GPS to the AIS100Pro and it will automatically multiplex (merge) the slower GPS data with the high speed AIS data and transmit everything on the high speed NMEA output (38,400 baud) - perfect for connection to a chart plotter with only one NMEA input."

Klik hier als u de installatiehandleiding (engels) wilt inzien of downloaden: